Forum

The Brownstoner Forum is for the site's users to ask and answer questions of local concern. You must be registered member to post, please refrain from self-promotional postings.

Material to cover/protect rubber roof?

11:26 AM 01/12/2013

 

We have a 1000 sq roof flat rubber roof. About a third of it is covered with a wood deck. We were told not to walk on or put anything on the rest of the surface unless we cover it first. We have tried snap in tiles and outdoor carpet, but nothing can withstand the intense sun and wind we get. I have considered astroturf but am concerned about drainage. We need something very affordable as we used all our funds to pay for the wood deck and something very weather resistant as it often feels like a tornado up there and it gets intense sun and rain. Thanks!

 

 

5 answers
  • vote

    I'm not 100% clear on your question, but all rubber roofs should probably be coated with that silver material (sorry, someone else may know the name but I think Karnak makes one) that you can buy at Home Depot. It comes in a 3-5 gallon bucket and you can roll it on. It's primarily for reflecting the sun in the summer so it protects the rubber and keeps the sub-roof area cooler.

    12:22 PM 01/12/2013 | 0 Votes

     

     

    Comments (1)

    • Thanks for your response and sorry if my question wasn't clear. Our roof is already coated. The issue is that putting something on the roof can cause damage (we were told!) like holes, etc. So we are supposed to put something down (ideally a deck but that's too expensive) before we put anything else on it (like chairs, a table, etc). Thoughts?

      12:33 PM 01/12/2013

          
  • vote

    Any chairs or tables should go on the wooden deck that you wrote already covers 1/3rd of your roof. You can walk on the unprotected surface to a reasonably limited extent, assuming you're not wearing spikes :-)

    6:49 PM 01/12/2013 | 0 Votes

     

     

  • vote

    The roofs of most buildings (both load capacities as well as roof materials) were never intended as party, recreation and relaxation spaces. Roofing materials are not engineered for foot traffic, let alone furniture, etc. Google "walk pads", which are laid on roof surfaces to provide protection for maintenance traffic.

    10:42 PM 01/13/2013 | 1 Votes

     

     

  • vote

    Our roof deck was designed by Sketcn & Hammer with the expertise of Susan and her iron worker, Manny. The weight load on a roof is often best carried by the 2 load-bearing walls utilizing steel beams to suspend the deck off the roof completely. The other open area roof surfaces shud be only covered with "catwalks" cutomized to an elevation so as not to pool up any drain-off of snow & rain underneath them.

    10:00 AM 01/28/2013 | 0 Votes

     

     

  • vote

    Asbestos is a good option. I got my house roofing done by Roof Lines East Inc , the roofing company in Toronto. They did a pretty good job.

    7:28 AM 04/04/2013 | 0 Votes

     

     

Answer